Shenzhen Vision Display Technology Co,.LTD
As a high-tech electronic product, we can not ignore the matters needing attention in the use process and daily maintenance. Now the Vision Display will take you to know about it.
●Clean precautions of LED Curtain Screen
1. Regular cleaning and maintenance: LED Display will accumulate more dust and rainwater on the screen for a long time, which requires regular and timely cleaning to prevent the effect of viewing;.
2. If you clean the surface of the module, please use a soft brush and gently brush it. It is forbidden to use any liquid substance to clean the surface of the LED module, otherwise the LED beads may be damaged;.
3. Correct wiping: The large screen surface of Led Display can be wiped with alcohol, or with brushes and vacuum cleaners.
Dust removal should not be done directly with a wet cloth.
●Moisture-proof and storage requirements
1.Storage temperature requirement: ambient temperature - 40 C < T < 60 C. After opening the package, the LED products should be stored at temperature < 30 C.And humidity < 60% environment;.
2. According to the environment of the display body and the control part, insect bites should be avoided, and rodenticides should be placed if necessary; 3. Led Display Screen should not be closed for a long time. In high humidity environment, if the screen body is not used for more than three days, the pre-hotspot lighting mode should be adopted: 30% - 50% brightness should be preheated for 4-8 hours, then adjusted to normal brightness (80% - 100%) to light the screen body, so as to light up the screen body. If the screen is not used for more than 7 days, it should be pre-heated for more than 12 hours before the brightness of 30% - 50% is adjusted to normal brightness (80% - 100%) to light the screen, so that the moisture can be removed so that there is no abnormality in use.
LED screens should be checked regularly to see if they are working properly, and damaged lines should be repaired or replaced in time. The main control computer and other related equipment shall be placed in the room with air conditioning and fine dust to ensure the ventilation, heat dissipation and stable operation of the computer. Non-professionals are forbidden to touch the internal circuit of the screen pedicle in order to avoid electric shock or damage to the circuit. If there is a problem, professionals should be asked to repair it.